Modwing Non Light Bearing vs Hardware Pack: What to Buy
By Shop Tactical Gear & Holsters丨Guerrilla Tactical | Published: 2026-11-03
Category: Comparaisons
Compare the Modwing Non Light Bearing wing and the Mod Wing Replacement Hardware Pack. Learn which part you actually need for your holster claw setup.
Quick answer
Buy the Modwing Non Light Bearing if you need the wing itself for a non light bearing Low Pro or Side By Side holster. Buy the Mod Wing Replacement Hardware Pack only if you already have a Modwing and just need the screws and nuts for the spacer.
What each part actually solves
These two products are not interchangeable upgrades. The Modwing Non Light Bearing is the complete wing assembly, including the injection molded wing and two spacers. The Mod Wing Replacement Hardware Pack is a fastener kit only, with twice the needed screws and nuts for the spacer-to-wing connection.
If your holster wing claw is missing, cracked, or you are adding a wing to a compatible holster, the wing assembly is the part that changes how the holster carries. If your wing is intact but a screw backed out at the range, the hardware pack is the cheaper fix.
The trade-off: completeness vs. cost
The Modwing Non Light Bearing costs more because it includes the wing and spacers, and it can be set up for left- or right-handed carry. That adjustability matters if you may switch sides or share the holster. The hardware pack costs less but solves only one problem: lost or damaged spacer fasteners.
The hardware pack works with both light bearing and non light bearing modwings, but it does not include other holster hardware. If you also need clips, belt attachments, or holster body screws, this kit will not cover those. Check what is actually missing before ordering.
When the cheaper part is the wrong part
A hardware pack cannot replace a broken wing, and it does not include spacers. If your current wing is damaged or you are building up a holster that never had a wing, the hardware pack alone leaves you without the concealed carry holster wing you need. In that case, the Modwing Non Light Bearing is the correct purchase even though it costs more.
Conversely, buying the full wing assembly just for screws wastes money if your existing wing and spacers are fine. Confirm the wing is compatible with your holster model before deciding, because the non light bearing Modwing is listed for non light bearing Low Pro and Side By Side holsters.
Decision trade-offs
- You need the wing itself: Choose the Modwing Non Light Bearing if your holster is a non light bearing Low Pro or Side By Side and the wing is missing, broken, or being added for the first time. It includes the wing and two spacers and can be set up left- or right-handed. Confirm your holster model is non light bearing before ordering.
- You only need fasteners: Choose the Mod Wing Replacement Hardware Pack if the wing and spacers are intact but screws or nuts for the spacer are lost or stripped. It fits both light bearing and non light bearing modwings. This kit does not include other holster hardware, so list every missing part first.
- You are unsure what is missing: Remove the wing and inspect the spacers and fasteners. If the wing is cracked or the spacers are gone, buy the wing assembly. If only the screws and nuts are missing, buy the hardware pack. Ordering both only makes sense if the wing is damaged and you also want spare fasteners.
Product facts
- Modwing Non Light Bearing: Replacement non light bearing Modwing attachment that works with non light bearing Low Pro and Side By Side holsters. This is the part to buy when the wing itself is missing or damaged on those specific holster models.
Modwing Non Light Bearing - Mod Wing Replacement Hardware Pack: Replacement Modwing hardware kit with 2x the needed screws and nuts for the spacer-to-wing connection, working with both light bearing and non light bearing modwings. It restores a wobbly or missing fastener without forcing you to buy a whole new wing assembly.
Mod Wing Replacement Hardware Pack
Which buyer are you?
Best for
- Owners of non light bearing Low Pro or Side By Side holsters who need a replacement or first-time wing
- Shooters who want the ability to configure the wing for left- or right-handed carry
Not for
- Anyone who only needs screws and nuts for an existing Modwing spacer
- Holsters that require light bearing wings or hardware beyond the spacer connection
