What the CAT7 TQ Holder Offers
The CAT7 TQ Holder is a dedicated carrier designed to keep your CAT7 tourniquet secure and accessible. Made from vacuum-formed .080″ Kydex, it provides a rigid, lightweight shell that holds the TQ’s shape. The adjustable side retention lets you dial in the draw tension, and the included Tek-Lok belt attachment makes it easy to mount on a belt or MOLLE platform. This guide walks you through setup and practical carry methods so you can integrate it into your medical gear setup.
Key Features at a Glance
- CAT7 TQ Holder: Made from vacuum formed .080″ Kydex. Kydex is durable and retains its shape, protecting the tourniquet and ensuring consistent retention over time.

CAT7 TQ Holder - CAT7 TQ Holder: Formed to fit the CAT7 TQ perfectly. A precise fit means the TQ won’t rattle or shift, and the carrier won’t add unnecessary bulk.
- CAT7 TQ Holder: Adjustable side retention. You can tune the draw tension to your preference, whether you want a quick rip or a more secure hold.
- CAT7 TQ Holder: Comes equipped with a Tek-lok belt attachment. The Tek-Lok allows easy mounting on belts and can be removed or repositioned without tools.
Setting Up the CAT7 TQ Holder
Follow these steps to mount the CAT7 TQ Holder on your belt or pack strap. The process is straightforward and requires no special tools.
- 1. Attach the Tek-Lok to the carrier: The Tek-Lok comes pre-assembled but may need adjustment. Loosen the screws, slide the Tek-Lok over the Kydex backing, and tighten the screws snugly. Ensure the locking tabs face outward for easy release.
- 2. Mount the Tek-Lok on your belt: Open the Tek-Lok by pressing the tabs, then slide it onto your belt. Close the tabs until they click. For MOLLE webbing, you can weave the strap through the loops instead.
- 3. Adjust side retention: The holder has adjustable side retention screws. Start with the screws flush with the Kydex, then tighten or loosen in small increments. Insert your CAT7 TQ and test the draw. You want enough tension to hold the TQ in place during movement but allow a smooth rip when needed.
- 4. Insert the CAT7 TQ: Slide the tourniquet into the carrier with the windlass rod facing up or down, depending on your preferred draw. The Kydex shell holds the TQ securely without deforming it.
Carry Methods and Placement Tips
Where you place your CAT7 TQ Holder affects both accessibility and comfort. Common carry positions include:
– Belt at the 11 o’clock or 1 o’clock position for cross-body draw with your strong hand. This keeps the TQ clear of your holster and mag pouches.
– Belt at the 8 or 4 o’clock position for a rear carry if you prefer a less obtrusive setup. Test your draw from this position to ensure you can reach it under stress.
– On a pack’s waist belt or shoulder strap for off-body carry. The Tek-Lok mounts easily to MOLLE webbing or a padded strap.
The adjustable retention lets you set the draw tension so the TQ stays put during movement but comes out quickly when you need it. Because the holder is slim, it doesn’t interfere with other gear on your belt. Experiment with placement during dry practice to find what works for your body and typical loadout.

