Cascadian Gun Metal Longsleeve Care Guide

Quick answer

Machine wash cold, tumble dry low, and turn the shirt inside out to protect the screen-printed graphics. Avoid bleach and high heat to keep the metal-inspired design intact.

Step-by-step care instructions

1. Turn the shirt inside out: Before washing, flip the longsleeve inside out. This protects the printed graphics from rubbing against other garments and the machine drum. Always check pockets and zippers on other clothes that could snag the fabric.
2. Select a cold water cycle: Use cold water (30°C / 86°F or lower) on a gentle or normal cycle. Hot water can shrink the cotton-poly blend and soften the print adhesive. Hot water is the leading cause of graphic cracking in the first few washes.
3. Use mild detergent, skip bleach: Add a small amount of mild liquid detergent. Do not use chlorine bleach or fabric softeners, as they weaken the print and break down the fabric fibers over time. If you need stain treatment, apply a dab of detergent directly to the stain and let it sit for 5 minutes before the cycle.
4. Tumble dry on low heat: Dry the longsleeve on the lowest heat setting or use the air-dry (no heat) option. Remove the shirt while it is still slightly damp to reduce wrinkles and prevent print damage. High heat can cause the shirt to shrink up to one full size and make the print peel at the edges.
5. Air dry as an alternative: Lay the shirt flat on a drying rack or hang it on a line away from direct sunlight. Sunlight can fade the dark gray fabric and the ink over time. Never wring or twist the wet shirt, as that distorts the shape and stresses the prints.

Product details

• Cascadian Gun Metal Longsleeve: Features metal af GT logo over a mountain shot on the back, GT logos down the sleeves, and GT logo on the front left print. True to size. The large back print and sleeve logos are vulnerable to heat and abrasion, making inside-out washing and low-heat drying essential for longevity.